Table of Gas Permeance and Water Permeabilities for Various Nanomembranes

Introduction As discussed in a previous post, we are working to adapt a PDMS flow insert as a manufacturable component. While our priority was maintaining the original flow channel geometry as Mansouri et al. designed, we slightly changed the channel length (5 mm –> 4.6 mm) to accommodate an extra bonding area for the pressure-sensitive…

Introduction A recent collaborative publication from RIT developed a modular µSiM to address the lack of physiological fluid flow in conventional open-well devices (Figure 1). The magnetic latching assembly of this design allows for quick configuration into a fluidic setup. The flow module is a microfabricated PDMS insert that contains a channel over the membrane…