Modeling pericyte loss in CNS disease using the µSiM platform to understand post-operative delirium superimposed on dementia – Michelle’s MPS Talk

I’ve been working with the AFM recently and have had some success getting images on supported pnc-Si films. Yesterday, I imaged three samples from sc 698: one untreated pnc-Si film and two films coated with aluminum oxide (1.5 nm and 5 nm thickness). Here are the scans (500 nm x 500 nm). The topmost scan…

I got three pinhole-free membranes from Karl after the inspection. They are from wafer#612. Locations are (-3, 1), (-3, 2), and (-3, 3). I used the UV/Ozone machine to oxidize and charge two of them while leaving the third one as a control. The protocol of UV/Ozone treatment was followed. The stir cell was set…

WHERE:  URMC ** Room # 4-7545 ** WHEN:    Tuesday April 16th & Wednesday the 17th. TIME:    9:00-4:00 P.M. Please drop off your pipettors early as we expect a good turnout. Pipettors will be done on a first come, first served basis.  Thank you!

Poor English Paper used as a starting point: Silicon Nitride Etch Rate paper This is a continuation of the work I’ve done, attempting to make freestanding MgF2 nanomembranes (theory and deposition) using a Silicon Nitride nanoporous substrate. I originally  wanted to use hot phosphoric acid to remove the Si3N4, but since we do not have that…