In researching for the paper for Advances in Chronic Kidney Disease (ACKD) I’ve run across some interesting papers. Here is one describing a proposed Human Nephron Filter… Human nephron filter proposed by Nissenson1 (1) 1Division of Nephrology, Department of Medicine, David Geffen School of Medicine at UCLA, Los Angeles, California, USA This imagined device was…
Following is a written protocol for SEPCON assembly. (Here is a link to a video demonstration) Materials required: wafer tweezers, small sample tweezers (preferably plastic), soft foam board from craft store, wafer of sepcon chips, razor blade, plastic enclosure to store complete SEPCON, top basket, bottom basket, 300 µm thick silicone sheet of pre-cut “U”…
SEPCON assembly
I couldn’t really make sense of what was happening in this post, and in particular this figure threw me for a loop: So to help myself understand the relationship I whipped up a little matlab app to show the relationship a little clearer: Moving the sliding bar on the bottom changes the y-position…
I took some copper tape and made a bus bar for BBB device V2-8. I used tweezers to smooth down the surface of the tape on each planar surface, routing the copper to the back side of each face, then collecting the lines to one side of the device. I verified that the connections…
Hello everyone! I plan to write several posts in the next couple of weeks about the laser annealing of our sputtered three-layer stack. This laser annealing experiment is done at Center for Nanophase Materials Sciences (CNMS) at Oak Ridge National Laboratory (ORNL). It is a collaborational proposal we submitted at the end of last year…
WHERE: URMC ** Room # 4-7545 ** WHEN: Tuesday April 16th & Wednesday the 17th. TIME: 9:00-4:00 P.M. Please drop off your pipettors early as we expect a good turnout. Pipettors will be done on a first come, first served basis. Thank you!
The competition keeps coming at us … Liu(Cui)JVSTB12